Preparing A New Micro Sd Card For Use - Snooper DVR-1HD Mini Manual Del Usuario

Preparing a new micro SD card for use

Please note minimum SD card requirement. Minimum 4GB. Maximum
GB. Speed Class 6 and over.
Your DVR-1HD comes with a Micro SD card pre-installed and already
prepared. However if you choose to upgrade or change the SD card you
will need to prepare it for use first.
1. Power off the device and insert the new SD card.
2. Power on the device. The SOS and power button LEDs will illuminate
red and flash.
3. Press the REC button. The SOS and power button LEDs will stay
illuminated but will stop flashing to indicate the preparation
procedure is underway.
4. After approximately 60 seconds the SOS button LED will turn off and
the blue REC button LED will flash to indicate that the SD card has
been successfully prepared and the unit is ready for use.
User tip: We recommend you connect your DVR to a permanent power
source so that the unit does not power off during the preparation
procedure.
UK • 11