Orbegozo SFA 7000 Manual De Instrucciones página 13

SFA 7000
Health Humidity
Low humidity (dry environment) can dry out skin, leading to problems like chapped lips, dry and
itchy skin, and a dry sore throat when you wake up in the morning. We know from life: relative
humidity of 45% RH - 65% RH will be good for human in diversified conditions. Ultrasonic
HUMIDITY fan is developed to make you feel more comfortable and cooling even in very dry
environment, by adding moisture in the air.
INSTALLING CHART AND TECHNICAL SPECIFICATIONS
1. Front guard ornament
2. Front guard
3. Blade cap
4. Blade
5. Guard mounting nut
6. Rear guard
7. Motor
8. Fan body
9. Base
10. Wheel
11. Base nut
12. Plastic tube joint
13. Plastic tube
Technical Specifications
Rated Voltage: 230V~
Rated Frequency: 50Hz
Fan Power: 65W
Humidifier Power: 35W
ASSEMBLY THE FAN
Assembling the stand fan body
1. Take out the fan body with motor from the box, remove the plastic bag.
2. Tear out the plastic bag wrapped on the motor cable and loosen the set screw on the fan rear
body, then put the excessive cable with smooth into fan body.
3. Place the iron tube into the fan body, match the concave of iron tube with screw hole, and then
tigh the set screw.
Assembling the stand fan body to the base
1. Take out the base nut under the body.
2. Match and fix 4 wheels into their holes of base and press them firmly.
3. Place the body to the base and fasten the base nut turning it clockwise.
Total Power: 100W
HUMIDITY Capacity: 285ml/h
Water Tank Capacity: 1500ml
13