Rheem RXAC Manual De Uso página 33

"COOL" button
4.
Press the COOL button, you can directly enter cooling mode.
"HEAT" button
5.
Press the HEAT button, you can directly enter heating mode.
"SWING" button (SWING
6.
Press this button, the horizontal wind direction vanes can swing automatically,
when
you have the desired vertical wind direction, press it again, the horizontal wind
direction vanes will be stopped at the situation of your choice.
NOTE: This function is not available for duct models
"HEALTH" button
7.
Press this button, you can turn on or off the "HEALTH" function.
"SLEEP" button
8.
Press "SLEEP" button, then display screen shows "SLEEP". The sleeping
function of the air conditioning is active.

When night mode (SLEEP) is activated, the cooling mode automatically
increases the set temperature by 1 °C after 1 hour and another 1 °C after
another hour.

When night mode (SLEEP) is activated, the heating mode automatically
decreases the set temperature by 2 °C after 1 hour and another 2 °C after
another hour.

The air conditioner works in night mode (SLEEP) for 7 hours and stops
automatically.

NOTE: If you press the "MODE" or "ON/OFF" buttons, the remote control
turns night mode (SLEEP) off.
"iFEEL" button
9.
Pressing this button activates the "iFEEL" function.
the remote control display shows the current room temperature. If is it not activated,
the remote control display shows the set temperature. This function is incompatible
with fan mode
"TIMER" button
10.
This button is used to set the Timing On or the Timing Off function.
With the remote control "OFF", press the "TIMER" button. The word "ON"
1.
appears on the display together with the timer, which can be adjusted in a
range from 0.5 to 24 h.
To adjust the timer, press the "
2.
pressed, the time increases or decreases by 0.5 h for the first 10 hours.
After the first ten hours, each time you press either button, the time
and SWING
(FAN).
)
When this function is enabled,
" or " " buttons. Each time they are