Fan Mode - Rheem RXAC Manual De Uso

3) Press the TIMER button again to confirm the clock time
4) Press other button to select the operation condition (including mode,
temperature, swing, fan, speed, etc.)
NOTE: When the Clock or Timing on setting is the same as the
setting time, the air conditioner will automatically close or
operate.

FAN MODE

When the "ON/OFF" button is pressed, the air conditioner starts running.
1.
Press the "MODE" button and select fan mode.
2.
3. Press the SPEED button to adjust the fan speed. You can select LOW,
MID and HIGH speeds.
4. If you press the button again, the air conditioner stops.
NOTE: in circulation mode, adjusting the temperature makes no
difference
SLEEP OPERATION MODE
When the "ON/OFF" button is pressed, the air conditioner starts running.
1.
Press the "MODE" button to select cooling or heating status.
2.
3. Open the lid of the controller, press the SLEEP button, the display will
show the sleeping function and it will be activated.
4. Press SLEEP button again, the sleeping function will be cancelled. Then
the air conditioner will keep its setting to operate.
5. Press ON/OFF button, the air conditioners stops.
NOTE:
This manual describes the functions of all the remote controls. If nothing
happens when you press a button, this is because the appliance does not
feature this function.