Using The Camera Controls - Velleman CAMIP5N1 Manual Del Usuario

Administrator
If you log in with an administrator user type, you can:
 see the camera view,
 use the software camera controls,
 access and change the device management settings.
Operator
If you log in with an operator user type, you can:
 see the camera view,
 use the software camera controls.
Visitor
If you log in with a visitor user type, you can:
 see the camera view.
9.

Using the camera controls

This section describes the camera view and the software camera controls.
For administator users: to learn more about device management settings, please refer to the full manual on the
cd included in the package.
When logging in as an administrator or operator, you will a window like the one below:
Notes:
 A visitor will see this window without the camera controls.
 The Device Management settings are only availble for an administrator.
 The functions and layout of the surveillance tool vary depending on the browser you are using.
The camera controls are
Option
OSD (= on-screen display)
Add OSD on record
Resolution
Mode
Fps
V. 05 – 04/06/2015
CAMIP5N1
Use
Select the number of cameras you want to display simultaneously
(1, 4 or 9).
To learn more about setting up multiple cameras, please refer to
the item Multi-Device Settings in chapter Device Management
below.
Show or hide the camera name on the display.
Show or hide the camera name when recording.
Select a resolution from the list.
Select a refresh rate from the list.
Select a frame per second setting from the list.
6 ©Velleman nv