Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Treble Control
1. Press SEL button repeatedly until the LED displays "TRE";
2. Revolve rotating volume button VOL to adjust the treble effect.
Balance Control BAL for Front Left/Right Loudspeakers
1. Press SEL button repeatedly until the LED displays "BAl";
2. Revolve SEL button clockwise/ anticlockwise to adjust the audio balance of front left/right loudspeakers.
Balance Control FAD for Rear Left/Right Loudspeakers
1. Press SEL button repeatedly until the LED displays "FAD";
2. Revolve SEL button clockwise/ anticlockwise to adjust the audio balance of front/rear loudspeakers.
Manual & Automatic Tuning and Fast Forward and Rewind
Buttons for Selecting Forwards or Backwards
a) During the reception of a radio:
Press transitorily CH+ or CH- The buttons can be operated to receive your desired broadcas-
ting station by manual incremental tuning forward or backward. Press longtime CH+ or CH- will automati-
cally tune to the stronger-signal broadcasting station backwards;
b) During playing a MMC/SD card or USB:
14
Press transitorily
will enter the prior song.
BAND/AMS Button (Automatic Memory for Stations and Automatic Scan for the Memory of Preset
Stations)
1. Auto Scan: Hold AMS button for a few seconds, radio then automatically scan and save the received radio
stations (save up to 30 stations), the radio will play the first saved chanel after the completion of automatic
searching.
2. Automatic selection: Press the CH +, CH-, or the number keys to select radio stations which have been
stored already. It supports the selection by the key combination (for example: press the key 1 and then press
the key 2 to select the stored radio station No. 12)
3. The frequency adjustment, Automatic Tuning: press the up or down key to adjust the radio frequency in
0.1MHZ steps, hold the UP or DOWN button with long press to automatically select a radio station, it will paly
the current station after it is received.
Radio Mode by Band Switch Button
Click AMS button to select your desired band.
EQ: Control Button
DSP tone (EQ off/EQ1/EQ2/EQ3)
Power Switch(POWER)
Switch on the unit by pressing the POWER, then the button light will be on. It stays the mode of FM radio
before inserting the SD card and USB flash disk. Or it keeps the mode as the lastest shutdown.
Press the POWER key in any mode, it will display the time, and then short press or press for 3 seconds
without keying action to return to the currently displayed mode.
www.multilaser.com.br
.The button will enter the next song; Press transitorily
. The button
Publicidad
Tabla de contenido
