ACDelco ARZ1204 Manual De Instrucciones página 12

LED BRIGHTNESS CONTROL
0
To adjust the LED brightness by 5 settings between Off and Full, press the LED
Brightness Control Button (8).
VIEW FLIP
0
The current rotation degree is displayed in the lower left corner of the LCD while the
tool is on. To flip the view by 180° increments between 0° and 180°, press the View
Flip Button (9).
VIDEO OUT PORT
Connect the Video Out Port to output what the camera is looking at into any displays.
Output Video format: NTSC
USING THE VISUAL INSPECTION CAMERA
1. Adjust the cable to best fit the opening.
2. After checking the workspace for hazards, insert the cable and adjust the zoom and
lighting as necessary.
3. Prepare the camera for inspection. The camera cable may need to be pre-formed or
bent to properly inspect the area. Do not try to form bends less than 2" radius. This
can damage cable. If inspecting a dark space, turn the LEDs on before inserting the
camera or cable.
1English1
X1.0
0
X1.0
180
English -11
X1.0
X1.0