ACDelco ARZ1204 Manual De Instrucciones página 13

4. Do not use excessive force to insert or withdraw the cable. This may result in
damage to the electrical device or inspection area. Do not use the cable or imager
head to modify surroundings, clear pathways or clogged areas, or as anything other
than an inspection device. This may result in damage to the electrical device or
inspection area. Do not insert the camera or cable into any space that will require less
than a 2" bend radius. Tight bends could damage the cable.
5. When the inspection is complete, carefully withdraw the camera and cable from the
inspection area.
WARNING
damage, always check the work area before beginning a job. Do not allow cable to
contact electrical, chemical, or moving hazards.
Behind Walls: Shut off circuit breakers to the entire area.
Inside Pipes: Ensure there is no electrical charge to the pipes before beginning
inspection. Do not allow liquid to flow down cable and into tool.
Auto Use: Turn off the engine and allow cooling before beginning inspection.
Do not allow the visual inspection camera or cable to contact oil, gas, or other
corrosive materials.
CAUTION
force or "kink" the cable. Do not use in areas where visual inspection camera and
cable will contact corrosive or oily substances. Do not use the cable to clear clogs or
move obstructions. This is not a drain cleaner!
WARNING
CLEANING
Always clean the imager head and cable after use with mild detergent.
Gently clean the LCD with a clean dry cloth. Avoid rubbing too hard on the LCD.
Use only alcohol swabs to clean the connections.
Wipe the hand held display unit down with a clean dry cloth.
STORAGE
The inspection camera must be stored in a dry secure area between 0°C (32°F) and
50°C (122°F). Store the tool, battery packs, charger and all cables in its carrying case in
a locked area out of the reach of children and people unfamiliar with visual inspection
equipment.
1English1
To reduce the risk of explosion, electric shock and property
To reduce the risk of damage to the tool, do not use excessive
MAINTENANCE
Remove batteries before cleaning.
English -12