Work Area; Electrical Safety; Personal Safety - ACDelco ARZ1204 Manual De Instrucciones

WARNING
Keep work area clean and well lit. Cluttered and dark areas invite accidents.
Do not operate power tools in explosive atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools create sparks which may ignite the
dust or fumes.
Do not operate power tool in an area where it could contact electrical wiring or
an electrically charged object. Contact with a "live" wire or object will make
exposed metal parts of the tool "live" and shock the operator.
Do not operate power tool near moving machinery. The cable can be tangled in
moving parts, pulling in the power tool and your hands and arms.
Do not use near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
Keep children and bystanders away while operating a power tool. Distractions
can cause you to lose control.
WARNING
Do not expose power tools to rain or wet conditions. Water entering a power tool
will increase the risk of electric shock. Dry hands before turning tool on or off and
before removing or installing the battery pack.
WARNING
Stay alert, watch what you are doing and use common sense when operating a
power tool. Do not use a power tool while you are tired or under the influence of
drugs, alcohol or medication. A moment of inattention while operating power tools
may result in serious personal injury.
Use personal safety equipment. Always wear eye protection. Safety equipment
such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for
appropriate conditions will reduce personal injuries.
Do not overreach. Keep proper footing and balance at all times. This enables
better control of the power tool in unexpected situations.
1English1

WORK AREA

ELECTRICAL SAFETY

PERSONAL SAFETY

English -3