Checks, Regulations And Adjustments - Zanotti CU Serie Manual De Uso

Hot to set the pressure value from keyboard
Push quick menù , it will appear on a display the label personal, menu
Push ok it will appear: 3-02
Push ok to modify the value, with left/right buttons to modify from one number to another, with up/down
buttons to change the value.
Push ok to set the new value and back to come back to main
How to modify the language
Push quick menù, it will appear on a display some different options: select "setup rapido" (quick setup) and
push ok, it will appear: 0-02 lingua (language)
Push ok button and then with up/down buttons you can select the language, push ok button to set the new
value and then back to come back to main
9

Checks, regulations and adjustments

Status:
It means: inverter and/or compressor functionning
Quick Menus:
It allows quick access to functions parameters:
01 - My Personal Menu
02- Quick set up
03- PID Process Loop
04- Changes Made
05- Loggings
Main Menu (Ext. Menu):
It allows the full access to all parameters
Quick Menu+Main Menu (Ext. Menu):
It allows the desired setting for the parameter
Info
Short help for used function
Cancel
With Cancel button it's possible delete the last operation
Back
With Back button you come back to the last function
Hand ON
With Hand On button the inverter is in Manuale operation
Auto On
With Auto On button the inverter is in Automatic operation
Off
With Off button the inverter is not operational.
Reset
With Reset button it's possible to erase the inverter alarms.
This button is on from parameter 0-43:
(0) reset alarms not possible
(1) reset alarms possible
3.200bar
Before turning the unit on, check that:
- locking screws are tight
- electrical connections have been carried out correctly.
In the event that the unit has been opened:
- no tools were left inside
- assembly is correct
- there are no gas leaks
- front cover is secured correctly
25