BLACK&DECKER GR3000 Manual De Instrucciones página 17

c. Disconnect the plug from the power source and/or the battery pack from the power tool before making
any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the
risk of starting the power tool accidentally.
d. Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power
tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.
e. Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any
other condition that may affect the power tools operation. If damaged, have the power tool repaired
before use. Many accidents are caused by poorly maintained power tools.
f. Use the power tool, accessories and tool bits etc., in accordance with these instructions, taking into
account the working conditions and the work to be performed. Use of the power tool for operations different
from those intended could result in a hazardous situation.
g. Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to
bind and are easier to control.
5. Service
a. Have your power tool serviced by a qualified repair person using only identical replacement parts.
This will ensure that the safety of the power tool is maintained.
6. Electrical safety
Your tool is double insulated; therefore no earth wire is required. Always check that the main voltage corresponds
to the voltage on the rating plate.
Warning! If the power cord is damaged, it must be replaced by the manufacturer, authorized Black & Decker
Service Center or an equally qualified person in order to avoid damage or injury. If the power cord is replaced by an
equally qualified person, but not authorized by Black & Decker, the warranty will not be valid.
7. Labels on tool
The label on your tool may include the following symbols:
Read the manual prior to operation.
Do not expose the appliance to rain
or high humidity.
Remove the plug from the socket if
the mains cable is damaged or
before maintenance.
Read Instructions Manual
Use Eye Protection
Use Ear Protection
PREPARATION
• Wear stout shoes or boots to protect your feet. Do not operate the appliance wearing open-toed sandals or when barefoot.
Wear long trousers to protect your legs.
• Wear safety glasses or goggles when operating this tool. Use a face or dust mask whenever the operations take place
in dusty surroundings. Hearing protection should be worn whenever the sound level seems uncomfortable.
• Guard against electric shock. Prevent body contact with earthed or grounded surfaces (e.g. metal railings, lampposts, etc.).
• Before using the appliance, visually check that the blade, blade nut and cutter assembly are not worn or damaged.
Check that the blade nut is securely fastened.
• Before starting the operation, check that your mowing path is free from sticks, stones, wire and any other objects.
Keep bystanders away.
Beware of sharp blades.
V ........... Volts
A ........... Amperes
Hz ......... Hertz
W........... Watts
min........ minutes
........ Alternating Current
17
Keep the cable away from the
cutting blades.
The blades will continue to rotate
after the machine is switched off.
........ Direct Current
n .......... No-Load Speed
0
........ Class II Construction
........ Earthing Terminal
........ Safety Alert Symbol
.../min.... Revolutions or Reciprocation
per minute
ENGLISH