GE Monogram ZHU30RSJSS Manual Del Propietário página 13

Multiple
Timer Mode
For more information see Custom Settings, Timer
Timers
Mode section for Multi-Timer feature. Each burner
can be linked to a timer. Burner must be on to set
the timer. When more than one burner is on, the
order of the timer is from left to right.
To Turn ON Multiple Timers
1. Touch the Timer Select pad. The
2. To set timer for the next burner, touch the Timer
To Turn ON Multiple Timers
Hold Timer Select pad for 3 seconds to cancel
timer. The corresponding burner power level and
display will blink. When the burner times out, the
corresponding timer also times out.
Hot Light
A hot surface indicator light (one for each cooking
element) will glow when the glass surface is hot
Indicator
and will remain on until the surface has cooled to
a temperature that is safe to touch.
Pan
When a pan is removed from the cooktop
surface, Burner level turns off; Power arc starts to
Detection
blink. If a pan is not detected for 25 seconds, the
Removal
control turns off automatically, lights turn off.
corresponding burner power level and the
display will blink. Touch the
adjust time. Timer automatically starts after 3
seconds if there is no further action. The "ON"
LED will light when timer is on.
Select pad. The corresponding burner power
level and the display will blink. Touch the
arrows to adjust time. Timer automatically starts
after 3 seconds if there is no further action. The
"ON" LED will light when timer is on. Repeat the
steps for the remaining timers.
Using Your Cooktop
Burner Power Level
or V arrows to
or V
Induction Cooktop
Display
Hot Surface Indicator Light
Power Arc
13