To Order Parts; Consumer Services Before You Call For Service - GE Monogram ZHU30RSJSS Manual Del Propietário

Metal marks
and scratches
potential for
permanent
damage
Our testing shows that
if you are cooking high
jelly or fudge and have
a spillover, it can cause
permanent damage
to the glass surface
unless the spillover is
immediately removed.

To order parts

20
1 Be careful not to slide pots and pans across
your cooktop. It will leave metal markings on the
cooktop surface.
These marks are removable using the
CERAMA BRYTE Ceramic Cooktop Cleaner with
®
the CERAMA BRYTE Cleaning Pad for Ceramic
®
Cooktops.
Damage from sugary spills and melted plastic:
1 Turn off all surface elements. Remove hot pans.
2 Wearing an oven mitt:
a. Use a single-edge razor blade scraper
(CERAMA BRYTE Ceramic Cooktop Scraper) to
®
move the spill to a cool area on the cooktop.
b. Remove the spill with paper towels.
To order CERAMA BRYTE
Cleaner and the cooktop scraper, please
call our toll-free number:
National Parts Center
CERAMA BRYTE Ceramic
®
Cooktop Cleaner ..........................# WX10X300
CERAMA BRYTE Ceramic
®
Cooktop Scraper ........................ # WX10X0302
Kit ............................................................# WB64X5027
(Kit includes cream and cooktop scraper)
CERAMA BRYTE Cleaning Pads for
®
Ceramic Cooktops ....................# WX10X350
Replacement Griddle (for any model
that has "Sync Burners") ...... # JXGRIDL1
Flush mount kit ........................... # JXFLUSH1
Sous Vide Kit .................................. # JXSOUSV1
Stainless Steel Cleaner
and Polisher ................................... # PM10X311
Ceramic Cooktop
®
800.626.2002
Care and Cleaning
Induction Cooktop
2 If pots with a thin overlay of aluminum or copper
are allowed to boil dry, the overlay may leave
black discoloration on the cooktop.
This should be removed immediately before
heating again or the discoloration may be
permanent.
WARNING: Carefully check the bottom of pans
for roughness that would scratch the cooktop.
3 Any remaining spillover should be left until the
surface of the cooktop has cooled.
4
the residue has been completely removed.
NOTE: If pitting or indentation in the glass surface
has already occurred, the cooktop glass will have to
be replaced. In this case, service will be necessary.