Optional Products; Preparing The Head Shell / Cartridge (Not Included); Attaching The Cartridge - Technics SL-1000R Instrucciones De Funcionamiento

Optional Products

Tonearm base
„
Consult your dear for optional products.
Supported
Model number
manufacturer
ー
SH-TB10-S
SH-TB10TC1-S Technics
SH-TB10SM1-S
SME
SH-TB10SM2-S
SH-TB10RT1-S
Ortofon
SH-TB10RT2-S
SH-TB10JL1-S
JELCO
SH-TB10JL2-S
SH-TB10KD1-S
IKEDA
SH-TB10KD2-S
* The product does not have mounting holes.
Process the product according to your tone arm.
32
(32)
English
Supported model
Blank tonearm base*
EPA-100mk2
M2-9R
M2-12R
AS-212S
RS-212D
AS-309S
RS-309D
SA-250
SA-750L
IT-345 CR-1
IT-407 CR-1

Preparing the head shell / cartridge (not included)

Attaching the cartridge

1
Attach a cartridge (store-bought)
tentatively.
Follow the cartridge's instructions to
correctly attach it to the head shell, and
tighten the screws lightly.
z When playing SP records, use a cartridge
for SP records.
z Be careful not to touch the stylus tip.
2
Adjust the overhang.
Use the included overhang gauge.
 Fit the overhang gauge to the head shell.
Head shell
Overhang gauge
k Move the cartridge to line the stylus tip up
with the end of the gauge.
Stylus tip
52 mm
z The cartridge should be parallel on
the shell head when viewed from the
top and side (the illustration is the top
view).
Tighten the screw for cartridge.
l
z Be careful not to allow the cartridge to
slip out of place.
Screw for cartridge
The overhang can be adjusted optimally.
(33)
English
33