Ground Lift Switch - Palmer PEPAMPBASS Manual De Usuario

18) PHONES
Use this 1/8" stereo mini jack to connect headphones or earbuds.
19) AUX IN
Use this input to connect stereo audio players to the Pocket Bass
Amp. Set the playback level on your audio device to minimum before
connecting to prevent ear damage.
20) BASS THRU
This ¼" mono connector enables connecting a tuner (see 12 and 14)
or a second bass amp.
21) XLR OUPUT
Use a quality balanced microphone cable to connect this balanced
mic level output to your mixer or audio interface.
22) OUTPUT
Use a quality mono instrument cable with ¼" plugs to connect the
unit to your bass amp or the next pedal in your effects chain.
This output and (21) are paralleled and electrically isolated.

23) GROUND LIFT SWITCH

In the LIFT position this switch disconnects the ground between
input and output to eliminate hum and noise when used with groun-
ded equipment.
24) FX INSERT
This ¼" TRS connector provides input and output connections to
insert external effects into the Pocket Bass Amp. It requires a
¼" stereo to dual ¼" mono plug Y-cable (SEND = tip, RETURN = ring,
SHIELD = ground).
34