Features; Assembly - RIDGID R250AF18 Manual Del Operador

Clavadora de acabado angular
Ocultar thumbs Ver también para R250AF18:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

FEATURES

PRODUCT SPECIFICATIONS
Motor ......................................................................................................................................................................18 Volt DC
Fastener Type .......................................................................................................... 15 gauge DA type 34 degree finish nails
Fastener Range .......................................................................................................................................1-1/4 in. to 2-1/2 in.
Magazine Capacity ................................................................................................................................................... 100 nails
Fastener Driving Speed ......................................................................................................................3 fasteners per second
Weight ......................................................................................................................................................................... 6.8 lbs.
kNOW YOUR FINISH NAILER
See Figure 1, page 14.
The safe use of this product requires an understanding of
the information on the product and in this operator's manual
as well as a knowledge of the project you are attempting.
Before use of this product, familiarize yourself with all op-
erating features and safety rules.
ANGLED MAGAZINE
The angled magazine allows access to tighter areas, and
its rear-loading design offers quick two-step reloading of
fasteners.
BELT HOOk
The hook mounts on either side of the tool and can be used
to hang the tool from a belt when not in use.
DEPTH OF DRIVE ADJUSTMENT
The tool-free depth of drive adjustment lets the operator
select precise driving depth of the fastener.

ASSEMBLY

UNPACkING
This product has been shipped completely assembled.
 Carefully remove the tool and any accessories from the
box. Make sure that all items listed in the packing list are
included.
 Inspect the tool carefully to make sure no breakage or
damage occurred during shipping.
 Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the tool.
 If any parts are damaged or missing, please call
1-866-539-1710 for assistance.
PACkING LIST
Angled Finish Nailer
Battery Pack
Charger
Tool Bag
Operator's Manual
JAM RELEASE
A tool-free jam release is provided for ease in clearing in-
frequent jams.
LED LIGHT
The LED light located on the front of the tool illuminates when
the LED button is depressed. The LED will stay illuminated
until either the button is depressed again or the tool has
been inactive for 15 minutes.
NO-MAR PAD
The no-mar pad prevents marring and denting when using
the tool on softer woods.
OVERMOLD GRIP AND TRIGGER
The overmold grip and trigger offer increased comfort and
control of the tool.
TRIGGER MODE SELECTOR
The trigger mode selector lets the operator choose between
Contact Actuation for higher productivity and Single Sequen-
tial Actuation for precise fastener placement.
WARNING:
If any parts are damaged or missing do not operate
this tool until the damaged or missing parts are
replaced. Failure to heed this warning could result
in serious personal injury.
WARNING:
Do not attempt to modify this tool or create
accessories not recommended for use with this
tool. Any such alteration or modification is misuse
and could result in a hazardous condition leading
to possible serious personal injury.
WARNING:
To prevent accidental starting that could cause
serious personal injury, always remove the battery
pack from the tool when assembling parts.
8 - English

Publicidad

Tabla de contenido
loading

Tabla de contenido