9
Replay
To replay a recording:
SEARCH
1) Activate the submenu
(fig. 25) either via the main menu (fig. 10), the
menu list (
chapter 6.1, fig. 8) or, if the menu
has been deactivated, via the button PLAY
(12) or
(31).
DMR-188 is additionally equipped with the
button SEARCH
(5) for direct activation of this
submenu.
㉕
Submenu VIDEO SEARCH
2) If you know the precise time of a recording,
enter the date and the time in the corresponding
input fields in the upper line (detailed description
of an input
chapter 6.2.3). Then click the but-
ton
PLAYBACK
.
If the replay is started, continue with step 5).
Note: If you enter a time which is close to the end
of the recording, you will not be able to replay it
with this selection method. To replay this record-
ing, enter an earlier time or use the direct selection
of files for the reproduction described in step 7).
3) If you only know the approximate period of time
when the recording was made, enter the desired
date or any date in the desired month and click
the button
SEARCH
.
In the overview, the selected month will be
shown with the 24 hours of the day selected
below it. Recordings were stored in the periods of
time highlighted in colours: Green highlights are
"normal recordings" made via permanent record-
ing, time-controlled recording or manual record-
ing. However, red highlights are recordings trig-
gered by an alarm (via an alarm input or via the
internal motion detector).
To show the overview of another day, click it in
the overview of the month or select it with the but-
tons
and
(8) and
(10) and
recorder or
,
,
,
(29) on the remote con-
trol and confirm with the button SEL / EDIT (9) or
SEL (33).
4) To replay the recordings, click the desired period
of time in the overview of the day (the overview is
divided into half-hour sections) or select it with
the buttons
and
(8) and
(13) on the recorder or
,
,
remote control and confirm with the button SEL /
EDIT (9) or SEL (33).
Note: If another recording is available within a
half-hour section, you will not be able to replay it
with this selection method. To replay this record-
ing, use the direct selection of files described in
step 7).
5) The replay will always start with a split screen;
however, like for live surveillance, the different
views can be switched over with a double click of
the left mouse button or with the corresponding
buttons (
chapter 7).
VIDEO SEARCH
/
㉖
Replay control
6) If the mouse pointer is moved to the lower edge
of the screen, a toolbar for controlling the replay
will appear (
mouse:
PAUSE
and to continue in frames
PLAY
SLOW1/2
in slow motion at
mal speed
>>2X
four-fold or eight-fold speed
<<2X
double, four-fold or eight-fold speed
If the box is not ticked off, adjust the vol-
ume for audio replay with
For muting, tick off the box.
to abort the replay
Alternatively, it will also be possible to control the
replay via the buttons on the recorder or on the
remote control:
PAUSE
(11) or
PLAY
(12) or
FWD
(13) or
REW
(10) or
STOP
(14) or
DMR-188 only: The audio replay will be muted
with the button MUTE
After aborting or ending a replay, the submenu
SEARCH
/
VIDEO SEARCH
7) For specific selection of a video recording in the
form of a single video file, click the button
LIST
. The file list of the day selected (example:
fig. 27) will be indicated.
(13) on the
(10) and
,
(29) on the
㉗
Submenu FILE LIST
For each file, its camera channel (
recording time (
and the type of recording (
Via the list field next to
possible to define if recordings of all camera
channels (
ALL
nel only (
CH1
TYPE, define if recording of both types (
"normal recordings" only (
fig. 26). Click the icons with the
,
FRAME –
to interrupt the replay
– to continue the replay
,
SLOW1/4
,
SLOW1/8
– for replay
1
1
1
⁄
,
⁄
or
⁄
of the nor-
2
4
8
,
>>4X
,
>>8X
– for replay at double,
,
<<4X
,
<<8X
– for reverse replay at
.
(31) =
PAUSE
,
FRAME
(31) =
PLAY
(31) =
>>2X
,
>>4X
,
>>8X
(31) =
<<2X
,
<<4X
,
<<8X
(31) = abort of replay
(5).
(fig. 25) will reappear.
FILE
CH
), the
TIME
), the file size in MB (
SIZE
TYPE
) will be indicated.
SWITCH CHN
, it will be
) or recordings of a particular chan-
,
CH2
, ...) are to be listed. Next to
ALL
NORMAL
) or recordings
triggered by an alarm only (
(
chapter 8.2.6).
If the list extends over several screen pages,
scroll through the pages with the buttons on the
right:
FIRST
first menu page (oldest recordings of the
day selected)
PREV.
previous page
NEXT
next page
LAST
last page (latest recordings of the day
selected)
For replay, click a video file in the list or select it
with the buttons
and
(13) on the recorder or
the remote control and confirm with the button
SEL / EDIT (9) or SEL (33). The replay will be con-
trolled as described in steps 5) and 6).
To exit the list and to return to the submenu
SEARCH
/
VIDEO SEARCH
, click the button
Note: It will not be possible to delete individual
recordings from the hard disk; it will only be pos-
sible to delete (format) the entire hard disk
(
chapter 8.1.1).
9.1
Exporting video files
For backup or for viewing on a computer, it will be
possible to copy the video files recorded on the inter-
nal hard disk to a storage medium (USB stick or hard
disk) connected to the USB port
nection, it may take a few seconds until the storage
medium has been recognized.]
1) As described in chapter 9, select a particular day
when video recordings were made and activate
the file list (example: fig. 27).
2) In the column
BAK
, click the box next to the
desired video files or select it with the buttons
and
(8) and
(10) and
recorder or
,
,
,
(29) on the remote con-
trol and confirm with the button SEL / EDIT (9) or
SEL (33). It will be ticked off. When it is clicked
again, the tick mark will be removed.
If the list extends over several screen pages,
scroll through the pages with the buttons on the
right:
FIRST
first menu page (oldest recordings of the
day selected)
PREV.
previous page
NEXT
next page
LAST
last page (latest recordings of the day
selected)
The following buttons will simplify the selection:
ALL
all files on this screen page will be
ticked off
INVERSE
the selection on this screen page will
be inversed, i. e. for all files selected,
the tick mark will be removed; all
other files will be ticked off
When scrolling through the menu pages, the
selection will be maintained.
3) If all desired files have been selected, click the
BACKUP
button
.
If the message "
No file selected!
pears, no file has been selected.
If the message "
No USB device found!
pears, no storage medium has been connected to
)
the USB port or the medium connected has not
been formatted or has not correctly been format-
ted (
chapter 9.1.1).
While copying, the total number of files to be
copied and the progress of this process will be
indicated. After successful copying, the message
),
"
Backup Successfully!
Confirm all messages by clicking the button
or confirm with the button SEL / EDIT (9) or SEL
(33).
The recorder will create a directory "RecordFile" on
the storage medium and will store the files in *.264
format (H.264 compressed) in it. The file name will
contain the channel number, the date and the time of
recording. The computer programs provided will
allow reproduction on a computer and conversion to
AVI format.
GB
ALARM
) are to be listed
(8) and
(10) and
,
,
,
(29) on
EXIT
.
(22). [After con-
(13) on the
" ap-
" ap-
" will appear.
OK
29