System Info; Factory Reset - Onkyo NS-6130 Serie Manual De Instrucciones

> Before Start > Part Names
"SLOW": Soft and fluid sound
∫ Digital Out
Make settings for digital audio output.
Select the item with / on the remote controller and press ENTER.
"On" (Default Value), "Off"

System Info

The MAC address of this unit and the current firmware version will be displayed.
Select "MAC address" or "Firmware" with

Factory Reset

Reset the settings of this unit to the status at the time of shipment. We recommend that you
take a note of the settings you have changed before going ahead with a factory reset.
To reset, select "Reset Start" with
ENTER again to start the rest. The unit will be placed on standby automatically when
initializing is completed.
Update
"Update" is not displayed if there are no firmware updates.
∫ via Network
Press ENTER to select when you want to update the firmware via network.
∫ via USB
Press ENTER to select when you want to update the firmware via USB.
Web Setup
You can make Wi-Fi connection settings using a web browser on a computer. Be sure your
computer is connected to the router wirelessly.
If this unit is connected to the router using ethernet cable, you can not do this setting.
1. Turn the unit on.
2. Press SETUP on the remote controller, select "Wi-Fi" in "Network" - "Connection", then
> Install
/ on the remote controller.
/ on the remote controller and press ENTER. Press
> Initial Setup > Playback
select "Wi-Fi Setup".
3. Press / to select "iOS device" and press ENTER.
4. In the list of wireless LAN connections on your computer, select SSID of this unit
(softap_0009B0xxxxxx).
0 "xxxxxx" in SSID is the lower three bytes of the MAC address.
5. Open the web browser on your computer and access http://192.168.200.1.
6. The "Web Setup" menu is displayed. Make network settings for this unit.
0 Depending on the equipment being used or connection environment, this function may
not work.
0 Consult the appropriate operating instructions for information regarding operation of the
computer.
0 Since this kind of connection is not encoded, a minor security risk may be involved.
Supplementary information | Advanced Setup | Others
E
N
23