Measuring Temperature - Powerfix KH 3322 Instrucciones De Uso

• Place the function switch
• Insert the measuring leads
COM
8
and .
• Connect the measurement prods with the object being tested.
Press the button
• The ascertained impulse width in % can now be read off in the display

Measuring temperature

• Place the function switch
ment in tenths of a degree or at the position
ment in degrees.
• Insert the red adaptor of the temperature sensor
mA °C
9
and
COM
the socket
Direct the top of the temperature sensor towards the object to be tested.
Attention!
The temperature sensor is not fireproof, therefore do not hold it in the fire. Use the
temperature sensor only for temperatures of up to 300°C. For temperatures
above 300°C use a special temperature sensor, available in specialist shops.
NEVER connect the temperature sensor with a source of electricity! There is a risk
of receiving an electric shock!
The temperature in degrees Celsius can now be read off in the display
q
at the position for frequency measurement
Hz/DUTY
until the indicator % appears in the display.
q
at the position
so that the minus pole (-) of the red adaptor is connected with
8
and the plus pole (+) with the socket
into the input sockets
for temperature measure-
for temperature measure-
- 103 -
VΩ
COM
into the sockets
mA °C
9
.
.
7
z
.
8
z
.