Publicidad
Idiomas disponibles
Idiomas disponibles
REH 500 A 1000 A 1500 A 2000 A
REH series Operate instruction
1. Once the appliance is freestanding or mounted and properly connected,rotated the upper
knob to pressurise the Heat Radiator.
2. Rotate the thermostat knob to the right,and check to see that the pilot lights up,indicating
that the Radiator is heating up.
3. Once the desired temperature is reached,turn the thermostat knob to the left until the pilot
light switches off. After this the thermostat will regulate the room temperature to the setting
selected.
■ Operation pilot light: whenever the pilot light is on, the appliance is operating until it
reaches the selected temperature.
■ Selector Switch: to turn the radiator power ON--Low heat--High heat--OFF
■ Thermostat: it allows you to regulate the selected room temperature.
■ Anti-freeze Safety: by selecting the minimum thermostat setting(*),the temperature will stay
at approximately 7°C. This will prevent freezing and save on heating costs (ideal for
prolonged absences).
screw
wall
wall
30
Publicidad
