Advanced Settings; Ip Camera Tool - Velleman CAMIP5N1 Manual Del Usuario

Option
Mode
Fps
Brightness
Contrast
Preset – Set - Go
Default all
Flip
Mirror
10.

Advanced settings

10.1 IP Camera Tool

You can access various options in the IP Camera Tool:
1. Double-click the IP Camera Tool on your desktop.
The tool will detect the camera connected to tour computer.
2. Right-click the camera. The options are:
V. 03 – 10/06/2013
CAMIP5N1
Use
Select a refresh rate from the list.
Select a frame per second setting from the list.
Set the brightness with the
Set the contrast with the
You can set a pre-defined location with the Preset function.
 To set a location:
Select a number from the list and click Set.
The system will save the preset.
 To use a location you have preset:
Select it from the list and click Go.
Reset all settings to their default values.
Select the Flip checkbox to show the image shown upside down.
Select the Mirror checkbox to mirror the image.
 Click an arrow to move the camera accordingly.
 Click and hold to move faster.
 Click C to start auto-scanning the entire area.
Start Auto tilt (vertical). Press
Start Auto pan (horizontal). Press
Switch IR LEDs on (for night vision).
Switch IR LEDs off.
Click to start live video.
Click to stop live video.
Enable or mute the microphone.
Enable or mute the sound.
Start manual recording.
Click to take a snapshot of the current camera view.
Set the camera view to full screen.
7
and buttons.
and buttons.
to stop.
to stop.
©Velleman nv