Menus - Ecler ALMAcard Manual De Instrucciones

5.2. Menus

•
File: options to transfer configuration files from the device to your computer or storage
device, retrieve saved files, etc.:
Note: A configuration file contains the configuration that was active in the device at the time
of saving, but not the content of its 20 presets. When you retrieve a configuration file
saved to disk, connect the equipment and transfer this configuration to the hardware (SEND
option), that configuration is not stored in any preset, unless it is saved (see Device menu)
In addition to the 20 user-writable presets, there are 4 predefined templates (not rewritable)
to start a user configuration from, which are quite common in this type of device:
o T01:
o T02:
o T03:
o T04:
•
Device : options to select a type of device to connect to (Select), recall and activate one of
the 20 presets in the device memory (Recall Preset), save the current configuration in the
device memory (store Preset) and update the device firmware using a compatible file (the
latest versions of compatible firmware for each of our digital devices are available on the
Ecler web site):
The options for preset recall and storage are also available directly at the top of the control
panel:
•
Help : gives access to the user manual, to the Ecler website, and displays the version
information of the application:
2 x 1 stereo way
2 stereo ways
4 mono ways
4 mono outputs
9