Signal Generator And Remote Ports - Ecler ALMAcard Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

5.3. Signal generator and remote ports

The built-in signal generator can feed an input to send its signal to the DSP processing chain in
order to perform a spectral analysis and/or adjustment of parameters depending on the acoustic
characteristics of the room and equipment.
Its parameters are:
SIGNAL: type of signal generated, Sinewave (sine wave with a variable frequency), Polarity
(specific waveform to determine the correct polarity of the speakers, with variable frequency),
White Noise and Pink Noise.
FREQUENCY: frequency of the Sinewave or Polarity signal
The A and B REMOTE connectors allow you to simultaneously control the volume of one or
multiple inputs, or one or multiple outputs through a WPm series wall panel or similar (0-10VDC).
Each preset saves the function assigned to the REMOTE ports at the time of saving (so different
presets can contain different functions for the same REMOTE port).
10

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Alma24

Tabla de contenido