Miele BSS 19 Instrucciones De Montaje página 23

Produktgruppe 522
23 von 24
am
Parts required
Quantity Mat. no.
1 07738640
or
1 07738650
Note
Service and repair work should only be carried out by a suitably qualified electrician (with specialist training, knowledge
and experience, and recent related work experience) in accordance with all appropriate local and national safety
regulations.
Servicing, modification, testing and maintenance of electrical appliances should only be carried out in accordance with all
appropriate legal requirements, accident prevention regulations and valid standards.
Danger!
Even with the machine switched off, supply voltage may be applied to some components.
Before starting any service work, the machine must be disconnected from the power supply. Suitable measurements must
be made to ensure that this is the case.
A general visual check should always be carried out.
Incorrect conversion or service work could lead to a risk of fire or electric shock.
Danger!
Grounding can be made ineffective if parts are reassembled incorrectly.
When reassembling the casing parts, it must be ensured that the grounding function operates correctly.
Carry out appropriate electrical safety checks.
Note
This kit, mat. no. 07738640 for PT 8251
This kit, mat. no. 07738650 for PT 8401
1 wiring harness 55X-K1/81-K1/73-X3
1 relay K1/81
1 relay 2K1/73
1 relay holder
3 4x10 screws
1 brown wire, AWG 20x90
1 200x4.8 cable tie
1 M20x1.5 screw
1 M20x1.5 hex nut
These installation instructions, mat. no. 07724460
List of illustrations:
Fig. 1, Relay installation and securing wires
16.06.2010 Diese Unterlagen dürfen ohne unsere Genehmigung weder vervielfältigt noch Dritten zugänglich gemacht werden. Eigentumsrechte vorbehalten.
Designation
BSS 19 peak load cut-out conversion kit for PT 8251
PT 8501 PT 8503
BSS 20 peak load cut-out conversion kit PT 8401
PT 8801 PT 8803
PT 8333, PT 8501 PT 8503, contains:
PT 8403, PT 8801 PT 8803, contains:
Umbau- und Montageanweisung
M.-Nr. 07724460
PT 8333,
PT 8403,