Warning And Safety Instructions - Miele professional A 814 Instrucciones De Manejo

en - Warning and Safety instructions
Read the operating instructions carefully before using this holder.
This prevents both personal injury and damage to the rinse fitting.
Keep these operating instructions in a safe place.
 Please also read the operating instructions for your washer-
disinfector and pay particular attention to the Warning and Safety
instructions.

The holder is approved solely for the applications specified in the
"Application technology" chapter of these operating instructions. All
other uses, conversions, and modifications are not permitted.

Inspect all mobile units, baskets, modules and inserts daily as de-
scribed in the "Maintenance" section in the Operating instructions for
the washer-disinfector.

New load carriers must be cleaned in the washer-disinfector
without a load prior to first use.

To clean and disinfect hollow instruments thoroughly from the in-
side they must be attached to the relevant holders or injector nozzles
on the injector manifold. The connectors must not come loose during
a programme!
Hollow instruments which have come away from their connectors
during the programme must be processed again.

When handling tips for air scalers and piezo scalers, be careful not
to injure yourself on the functional ends of the instruments. For your
own safety, wear gloves and, if necessary, a surgical mask and pro-
tective goggles when sorting the instruments.

Any hollow items that have become disconnected from their
injector nozzles, adapters or holders during processing must be
re-processed.

The last rinse should be carried out with demineralised water
wherever possible.
Miele cannot be held liable for damage caused by non-compliance
with these Warning and Safety Instructions.
27