Technical Data - Urrea UP875 Manual De Usuario Y Garantía

MAINTENANCE
Maintenance frequency is shown in the illustra-
tion below.
PARTS & MAINTENANCE
Tool repair and maintenance should only be car-
ried out by an authorized Service Center.
When the life of the tool has expired, it is rec-
ommended that the tool be disassembled, de
greased and parts be separated by material so
that they can be recycled.

TECHNICAL DATA

COLLET CAPACITY
AIR FLOW
RECOMMENDED AIR PRESSURE
AIR INLET
HOSE INTERNAL DIAMETER
NO LOAD SPEED
WEIGHT
LUBRICATION
The parts shown in the assembly for proper
operation of your air tools are identified as fol-
lows:
1. Air filter.
2. Regulator.
3. Lubricator.
4. Emergency shut-off valve.
5. Hose diameter.
6. Thread size.
7. Coupling.
8. Safety Air Fuse.
9. Oil.
10. Grease (During assembly).
48h
90 psi
E N G L I S H •
UP875
1/4" (6,35 mm)
4 CFM
90 PSI
1/4" NPT
3/8" NPT
22 000 r/min
450 g (1 lb)
U s er 's M an u al
24h
7