Safety
− Set up the paper shredder in the vicinity of a properly
installed socket. The socket must be freely accessible.
− Remove regularly any shredded paper, credit card and
CD residue from the underside of the cutting unit using a
suitable tool (e.g. a brush).
− Always switch the paper shredder off and unplug the
power plug before emptying the waste bins.
− After pulling out the waste bins, sharp and pointed parts
of the cutting unit become touchable. Operate carefully.
− Lay the power cord so that it does not pose a tripping
hazard.
− Only use the paper shredder when it is fully and correctly
assembled.
− Never disassemble the paper shredder for cleaning or
storage.
NOTICE!
Risk of damage!
Improper handling of the paper shredder may result in damage
to the paper shredder.
− Do not operate the paper shredder for longer than
3 minutes without interruption. Allow it to cool down to
room temperature first before restarting operation.
− Do not drop paper clips or staples into the feed slots.
− Both cutting units will rotate when one is activated by the
respective detection sensor. Make sure that there are no
objects close to the feed slot which is not in use.
− Do not compress the shredded paper in the waste bin with
your hands or feet. The pressure could damage the waste
bin.
− Only insert paper or credit cards, but not other items into
the paper / credit card feed slot.
− Only insert CDs, but not other items into the CD feed slot.
− Do not insert more than one CD or more than one credit
card into the feed slot at the same time. The cutting unit
could be irreparably damaged.
12