Miele professional A 302 Instrucciones De Manejo página 31

A 302
A 302/1
If the tip of an injector nozzle touches the bottom of a piece of glass-
ware the plastic support has to be pushed upwards.
Push the plastic support upwards to the height required. If neces-

sary use a pair of pointed pliers to do so.
Push the O-ring up to the plastic support to secure it in position.

If the tip of an injector nozzle touches the bottom of a piece of glass-
ware the clip has to be pushed upwards.
en - Areas of application
31