Beta 1934MAV Manual De Uso E Instrucciones página 11

PERSONAL PROTECTIVE EQUIPMENT TO WEAR WHILE OPERATING PNEUMATIC TOOL
Failure to observe the following warnings may result in physical injury and/or disease.
ALWAYS WEAR HEARING PROTECTION WHILE OPERATING PNEUMATIC TOOL
ALWAYS WEAR EYE PROTECTION WHILE OPERATING PNEUMATIC TOOL OR PERFORMING
MAINTENANCE JOBS
ALWAYS WEAR PROTECTIVE GLOVES AGAINST PHYSICAL AGENTS WHILE OPERATING
PNEUMATIC TOOL
ALWAYS WEAR SAFETY SHOES
Additional personal protective equipment to wear according to the values found in the environmental hygiene/risk
analysis survey if the values exceed the limits under current regulations.
WEAR ANTI-VIBRATION GLOVES WHILE OPERATING PNEUMATIC TOOL FOLLOWING A
SPECIALLY CONDUCTED SURVEY OF LEVEL OF DAILY EXPOSURE OF HAND-ARM SYSTEM TO
VIBRATION
WEAR PROTECTIVE MASK AGAINST PHYSICAL AGENTS IF THE VALUES FOUND IN THE
ENVIRONMENTAL HYGIENE ANALYSIS SURVEY EXCEED THE LIMITS UNDER CURRENT
REGULATIONS
WEAR PROTECTIVE HELMET
TECHNICAL DATA
FREE SPEED
CHUCK CAPACITY
POWER
AIR INLET
MAXIMUM PRESSURE
MINIMUM INTERNAL HOSE SIZE (ø)
MEAN AIR CONSUMPTION
WEIGHT
OVERALL LENGTH
TUBE LENGTH
SOUND PRESSURE LEVEL
SOUND POWER LEVEL
VIBRATION LEVEL
KEY TO SYMBOLS
a: wheel rotation spindle
b: tube guard with air outlet
c: open end wrench
d: grinding wheel
INSTRUCTIONS
Air supply connection
For correct use of the pneumatic tool, always keep to a maximum pressure of 6.2 bars, as measured at the tool inlet. Feed the
pneumatic tool with clean, condensate-free air (picture 4). Excessively high pressure or humidity in supply air results in shorter life for
the mechanical parts and may damage the tool..
1934MAV
56,000 rpm
Ø 3 mm
0.04 kW
1/4" GAS
6.2 bars
4.5 mm
115 l/min
200 g
150 mm
1.5 m
71.0 dB(A) (EN ISO 15744)
76.0 dB(A) (EN ISO 15744)
2
2.5 m/s (ISO 28927-2)
e: grinder start control
f: air inlet
g: air inlet fitting 1/4" GAS
h: oil lubrication
1934MAV70
70000 rpm
Ø3 mm
0.08 kW
1/4" GAS
6.2 bars
4.5 mm
115 l/min
210 g
150 mm
1.5 m
80.0 dB(A) (EN ISO 15744)
87.0 dB(A) (EN ISO 15744)
2
4 m/s (ISO 28927-2)