Identification Labels - Weq CFW500 Serie Manual Del Usuario

General Information
Table 2.2: Available options for each field of the nomenclature according to the rated current and voltage
Output Rated
Frame N° of Phases
Current
01P6 = 1.6 A
02P6 = 2.6 A
A
04P3 = 4.3 A
S = single-phase
07P0 = 7.0 A
07P3 = 7.3 A
B
10P0 = 10 A
01P6 = 1.6 A
A 02P6 = 2.6 A
B = single-phase
04P3 = 4.3 A or three-phase
07P3 = 7.3 A
B
10P0 = 10 A
07P0 = 7.0 A
A
09P6 = 9.6 A
B 16P0 = 16 A
T = three-phase
C 24P0 = 24 A
28P0 = 28 A
D 33P0 = 33 A
47P0 = 47 A
01P0 = 1.0 A
01P6 = 1.6 A
A 02P6 = 2.6 A
04P3 = 4.3 A
T = three-phase
06P1 = 6.1 A
02P6 = 2.6 A
04P3 = 4.3 A
B
06P5 = 6.5 A
10P0 = 10 A
14P0 = 14 A
T = three-phase
C
16P0 = 16 A
24P0 = 24 A
T = three-phase
D
31P0 = 31 A
01P7 = 1.7 A
03P0 = 3.0 A
04P3 = 4.3 A
T = three-phase
C
07P0 = 7.0 A
10P0 = 10 A
12P0 = 12 A

2.4 IDENTIFICATION LABELS

There are two identification labels, one complete nameplate, located on the side of the inverter
and a simplified label under the plug-in module. The label under the plug-in module allows the
8 | CFW500
of the inverter
Rated
Voltage
power supply.
2 = 200... 240 V
power supply.
power supply.
power supply.
4 = 380...480 V
power supply.
power supply.
5 = 500...600 V
power supply.
Available Options for the Remaining Identification
Codes of the Inverters
Protection Conducted
Brake
Rate Emission Level
Blank or C2
NB
Blank or C3
DB
NB
DB
NB
DB 20 or N1
Blank or C3
Blank or C2
NB
Blank or C3
Blank or C2
DB
Blank or C3
DB Blank or C2
DB Blank or C3
DB 20 or N1
Hardware
Version
C2
Blank
Blank or
H00
Blank or
Blank
H00