Startup; Startup Menu; V/F Control Type (P0202 = 0) - Weq CFW500 Serie Manual Del Usuario

Powering up and Startup

5.2 STARTUP

The startup is explained in a very simple way, using the programming features with the existing
parameter groups in the menus STARTUP and BASIC.

5.2.1 STARTUP Menu

5.2.1.1 V/f Control Type (P0202 = 0)

Seq Indication on the Display / Action
1
Monitoring mode.
„
Press the key ENTER/MENU to enter 1
„
level of programming mode.
3
When the STARTUP group is selected
„
Press the key ENTER/MENU.
5
When the desired value is reached, press
„
ENTER/MENU to save the modification.
Press the key
„
7
If necessary, modify the content of "P0402
„
– Motor Rated Speed".
Press the key
„
9
To end the Start-up routine, press the Key
„
BACK/ESC.
To return to the monitoring mode, press the
„
key BACK/ESC again.
Figure 5.2: Sequence of the startup group for V/f control
30 | CFW500
Seq
st
for the next parameter.
for the next parameter.
Indication on the Display / Action
2
The PARAM group is selected, press
„
the keys or
STARTUP group.
4
If necessary, press ENTER/MENU to
„
modify the content of "P0202 – Control
Type" for P0202 = 0 (V/f).
6
If necessary, modify the content of "P0401
„
–Motor Rated Current".
Press the key
„
8
If necessary, modify the content of "P0403
„
–Motor Rated Frequency".
Press the key
„
until selecting the
for the next parameter.
for the next parameter.