Indications On The Hmi Display - Weq CFW500 Serie Manual Del Usuario

HMI (Keypad) and Basic Programming

4.2 INDICATIONS ON THE HMI DISPLAY

Menu (to select the
parameter groups) –
only one parameter
group is shown
at a time.
Parameter groups available in the field Menu:
PARAM: all parameters.
„
READ: reading parameters only.
„
MODIF: parameters modified in relation to the default only.
„
BASIC: parameters for basic application.
„
MOTOR: parameters related to the control of the motor.
„
I/O: parameters related to digital and analog inputs and outputs.
„
NET: parameters related to the communication networks.
„
HMI: parameters to configure the HMI.
„
SPLC: parameters related to SoftPLC.
„
STARTUP: parameters for oriented Start-up.
„
Status of the inverter:
LOC: command source or local references.
„
REM: command source or remote references.
„
: direction of rotation by means of arrows.
„
CONF: configuration error.
„
SUB: undervoltage.
„
RUN: execution.
„
26 | CFW500
Inverter status
Main display
Figure 4.2: Display fields
Secondary indication
Measurement unit
(it refers to the value
of the main indication)
Bar graph