System Requirements - ENERGY SISTEM XC6 Manual De Usuario

NOTES ON WATE RPROOf CASE mAINTENANCE
≥
Be sure to come ashore within 60 minutes after going underwater, this will maintain the appearance, quality and
water resistance of the waterproof case.
≥
After removing the camcorder from the waterproof case, soak the waterproof case in a bucket
of clean water for about 10 minutes. Do not use any soapy water, mild detergents, alcohol or
similar liquids to clean the case. Wipe the waterproof case dry with a lint-free cloth. Place
the waterproof case in a well ventilated cool place to dry naturally (do not place under direct
sunlight).
≥
The material should be replaced once a year to maintain its water resistance.
≥
If water accidentally enters the camcorder or any problem occurs when it is in water, please get
it out of the water immediately and take proper actions. Dry the camcorder and send it for repair,
if required

SYSTEm REQUIREmENTS

The camcorder requires a PC with the following specifications for full HD 1080p 30fps and 720p 60fps playback:
≥
SO, Windows® or Mac OS X®
≥
Intel® / AMD Dual-Core CPU or higher
≥
At least 1 GB of RAM or higher
≥
Video Card DirectX 9 (DirectX II is recommended)
≥
Standard USB 1.1 port or higher
≥
At least 2GB or greater available hard disk space
Note: A USB 1.1 port will enable you to transfer files to and from your host PC, but transfer speeds will be faster
with a USB 2.0 port.
45