Installing The Battery; Removing The Battery; Charging The Battery - ENERGY SISTEM XC6 Manual De Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

INSTAllING THE bATTERY

Warning: Use only the supplied battery or a similar battery recommended by the manufacturer or the dealer.
INSTAllING
1.
Push down the battery compartment cover to open it.
2.
Align the battery contacts and then insert the battery into the compartment with the ribbon
underneath the battery.
3.
Close the battery compartment cover.

1.1.5 REmOvING THE bATTERY

1.
Open the battery compartment cover.
2.
Pull the ribbon to remove the battery.

CHARGING THE bATTERY

You can charge the battery using the micro USB cable that came with the camcorder. Follow the steps below to
charge the battery.
1.
Install the battery into the battery compartment.
2.
Plug the micro-USB connector to the USB port of your device.
3.
Plug the other end of the USB cable to a computer
51

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Xc4

Tabla de contenido