Troubleshooting - TRENDnet TEW-432BRP Guía De Instalación Rápida

Trouble Shooting
Q1: I inserted the Easy Go CD-ROM into my computer's CD-ROM drive and the installation menu does not appear automatically. What should I do?
A1: If the installation menu does not appear automatically, click Start, click Run, and type D:\Autorun.exe where "D" in "D:\Autorun.exe" is the letter assigned to your computer's
CD-ROM Drive. Then click OK to start the installation.
Q2: How can I get into the TEW-432BRP web configuration page?
A2: After you install the TEW-432BRP Wireless Router, you can access the web configuration page by opening your web browser and entering http://192.168.10.1 into the web
browser's address bar, where http://192.168.10.1 is the default IP address of the TEW-432BRP Wireless Router. The default user name and password is admin.
Q3: I am not sure what type of Internet Account Type I have for my Cable/DSL connection. How do I find out?
A3: Contact your Internet Service Provider's (ISP) Customer Service for the correct information.
Q4: I received an error message while running the Install Wizard. What should I do?
A4: Make sure that your computer's CD-ROM is in working condition. Also verify that all cable connections are secure and that you are able to connect to the Internet, and then
retry installing the router. During setup, the Install Wizard will check the operation of your network adapter and Internet connection. If you get the following error codes try the
corresponding troubleshooting steps:
Error 301/302: Internal Error
1) Click cancel to exit the program
2) Eject the CD
3) Restart your Computer
4) Reinsert the Router setup CD
Error 311/312: No Wired Adapter Detected
If your PC has a wired network adapter try the following:
1) Enable your wired network adapter
2) Click Retry to install your router again
If you PC do not have a wired network adapter, you must install a wired network adapter.
Error 313: Multiple Wired Adapters Detected
1) Identify the wired network adapter that you wish to use for setting up your router
2) Disable all other wired network adapters
3) Click Retry to install your router again
Error 321: Ethernet Cable Not Connected
1) Make sure the Ethernet cable from your PC is securely connected to a LAN port on the back of your router
2) Make sure the power cable on your new router is securely connected and the lights on the front of your router are flashing.
3) Click Retry to install your router again
Error 322: New Router Not Detected
1) Make sure that you are connecting your new router and not your old router (if applicable).
2) Make sure the Ethernet cable from your PC is securely connected to LAN
3) Click Retry to install your router again
10