Knowyourpressure Washer - Craftsman 580.752540 Instrucciones De Uso

Ocultar thumbs Ver también para 580.752540:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

KNOWYOURPRESSURE WASHER
[_
Read the Operator's Manual and safety rules before operating your pressure washer.
Comparethe illustrations with your pressure washer to familiarize yourself with the locations of various controls and
adjustments. Savethis manual for future reference.
A - Spray Gun-- Controls the application of water onto
cleaning surface with trigger device, includes trigger lock.
B - Spray Tips-
Detergent, 0°, 25°, 15° and 40°: for
various high pressure cleaning applications.
C - Accessory Tray -- Provides convenient storage for
accessories, such as gun, spray tips, etc.
D - Nozzle Extension with QuickConnect -- Allows you to
switch between five different spray tips.
E - High Pressure Hose -- Connectone end of hose to water
pump and the other end to spray gun.
F - Warning/Operating Instructions Tag -- identifies hazards
and proper procedure to start/stop pressure washer.
G - Fuel Tank -- Fill tank with regular unleaded fuel. Always
leave room for fuel expansion.
H - Choke Lever-
Used when starting a cold engine.
J- Fuel Valve-- Used to turn fuel supply on and off to
engine.
I( - Throttle Lever -- Sets engine in starting mode for recoil
starter and stops a running engine.
L - Air Filter -- Protects engine by filtering dust and debris
out of intake air.
M - Recoil Starter -- Used for starting the engine manually.
N - DetergentSiphoning Tube/Filter -- Use to siphon
pressure washer safe detergents into the low pressure
stream.
P - Automatic Cool DownSystem -- Cycles water through
pump when water reaches 125°-155°F. Warm water wiii
discharge from pump onto ground. This system prevents
internal pump damage.
R - Water Inlet -- Connectionfor garden hose.
S - Oil Drain -- Drain engine oil here.
T- Oil Fill -- Checkand add engine oil here.
U - High Pressure Outlet -- Connection for high pressure
hose.
V - Pump -- Develops high pressure.
Items Not Shown:
Identification Label (near rear of base plate) -- Provides
model and serial number of pressure washer. Pleasehave
these readily available if calling for assistance.
Engine Identification -- Provides model, type and code of
engine. Pleasehave these readily available if calling for
assistance.

Publicidad

Tabla de contenido
loading

Tabla de contenido