Maintenance; General; Air Intake Screen; Storage - Husqvarna BA101 Manual De Instrucciones

Ocultar thumbs Ver también para BA101:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

General

Remove the ignition cable and the spark plug to carry out
inspection and maintenance. Keep all parts of your body
away from hot surfaces.

Air intake screen

Check that the air intake is not blocked on all sides
including the underside, for example, by leaves or
rubbish. A clogged air intake reduces the machine's
blowing capacity and increases the engine's working
temperature, which can result in engine failure. Stop the
engine and remove the object.
WARNING! Never use the blower if the
!
screen is not in place. Before use, check
that the screen is in place and
undamaged.

Storage

Perform the following steps after each use:
Allow attachment to cool before storing or
transporting.
Store in a high, cool, dry, indoor area out of reach for
children.
Seasonal storage
Prepare attachment for storage at end of season or if it will
not be used for 30 days or more. If your blower attachment
is to be stored for a period of time:
Clean the unit.
Inspect attachment for any loose or damage parts.
Tighten any loose screws.
Replace any damaged, worn or broken parts.
At the beginning of the next season, use only fresh
fuel having the proper petrol to oil ratio.

MAINTENANCE

Maintenance
Below you will find some general maintenance
instructions. If you need further information please
contact your service workshop.
Daily maintenance
Clean the exterior surface of the blower.
Check that all the housing are free of cracks.
Check that the machine is in perfect working order.
Check that all nuts and screws are tight.
Clean the labels using a damp cloth with a mild detergent.
English
9

Publicidad

Tabla de contenido
loading

Tabla de contenido