Tp List - Engel RS8100HD Manual De Usuario

In Antenna Setup mode:
1 Satellite: In this item, press [Volume -/ Volume +]
key can switch Satellites and press [OK] key can
enter satellite list for you to select directly.
1 LNB Freq: In this item, press [Volume -/ Volume
+] key can select the parameter. Option is
5150/5750/5950/9750/10000/10050/10450/106
00/10700/10750/11250/11300/5150-5750/5750-
5150/Universal(9750-10550)/Universal(9750-10
600)/Universal(9750-10700)/Universal(9750-10
750)
2 Transponder:
3 DiSEqC1.0: You can use [Volume -/ Volume +] key
to switch options. There are several options for
your selection: Disable / Port1 / Port2 / Port3 /
Port4
4 22K: You can use [Volume -/ Volume +] key to
switch "ON /OFF". When this item is switched to
"ON", receiver will receive TV and radio input
signal from 22K port. If the item is switched to
"Off", the receiver will receive all signals from 0K
port.
!
Notice
When you choose LNB type "Universal", you
cannot modify 22K.
5 Polarity: In "Polarity" item, [Volume -/ Volume +]
key to switch "Auto / H / V" functions.
6 Motor Type: you can select
off/DiSEqC1.2/USALS in "Motor Type" field, there
will display the screen like below:
7 FTA Only: press [Volume -/ Volume +] key to
select scans all channels or just scans free
channels. If you select "Yes", it will scan free
channels only.
8 Scan Channel: All Channel/TV
Channel/Radio/SD Channel/HD Channel
9 Network Search: In Network Search, press
[Volume -/ Volume +] key to select whether
network search or not.
10 Scan Mode: you can select Auto Scan/present
Scan
11 Moving the highlight to "Scan Mode" item and
press [OK] key to start scanning. Next screen will
display the process and show the current scanning
channel.
4.4

TP List

When you enter to "TP List" menu, there will display the
screen like below:
12