Information; Factory Setting; Display Setting; Conax Ca - Engel RS8100HD Manual De Usuario

Press [OK] key to enter the "TOOLS". If Menu Lock is
"On", it will display a dialogue for user to key in
password. The default Password is "0000".
1 Press [Up/ Down] key to select menu items
among Information, Factory Setting, and so on.
2 Press [Left] key or [Exit] key to go back to main
menu.
6.1

Information

1 When you enter to "Information" menu, you will
see a screen like above. The screen displays the
items as "Hardware Model, Software Model,
Product ID" information. And the latest software
update date and time.
2 Press [Exit] key to draw back from "System Setup"
menu.
6.2

Factory Setting

When you press [OK] key in the "Factory Setting" item:
1 It will show a warning message to inquiry you "The
operation will load default and erase all the
channels that user added, continue?".
2 If you select "Yes" option, the all revised
parameters of the receiver will reset to default
value. Please carefully to using this function.
3 In step 1 and step 2, select "No" or press [Exit] key
can draw back from this item and without saving.
6.3

Display Setting

1 Display Setting can set brightness, contrast,
saturation, Hue, Sharpness, and Default Value.
2 You can set the value by pressing [Left/Right] key
between 1 and 100.
6.4

Conax CA

1 Press OK Key when highlight on "Conax CA" will
enter the card information Menu select like below:
18