Local Time Setting - Engel RS8100HD Manual De Usuario

1 Video Resolution is for switching the system
outputting video resolution.
Move highlight on it and press left or right key, it
will switch video resolution circularly by the
sequence 480i <->576i under RGB mode and 576i
<-> 576P <-> 720P <-> 1080i under YUV mode.
This effect is equal to press V MODE Key under
Full Screen and their last setting saving will be
efficient for each others. By Source means system
will set the video output resolution according to the
program it's playing, different resolution programs
switching perhaps will makes TV screen flickering.
By Native TV means system will be according to
the HDMI TV's max supported resolution to set its
resolution, if system is not connected to a HMDI
TV, it will set resolution to be default.
2 Aspect Mode is for switching the screen aspect
ratio mode. Now we provide below options: 4:3
PS / 4:3 LB / 16:9/Auto. You can press [Left/Right]
key to select each mode circularly. 16:9 will
provide user pillar box mode it means user use
16:9 TV to display but need to see a 4:3 full display
picture. System will force press wide screen
picture to be narrow and there're black band on left
and right site. Auto means system won't do any
aspect ratio translation, 16:9 picture source will be
good display on a 16:9 TV but will be too narrow
on a 4:3 TV, and 4:3 picture source will be too
wide in a 16:9 TV but will be good display in a 4:3
TV.
3 Video Out is for setting the video output mode. It
has option: RGB, CVBS.
4 Digital Audio Out is for setting the both SPDIF and
HDMI's digital audio output mode, it has options
LPCM Out, BS Out and Auto, You can press
[Left/Right] Key to select each mode circularity.
LPCM Out means system will decode no matter
AC3 or PCM audio track data to be LPCM, digital
audio decoder or HDMI TV will get LPCM digital
audio data. BS Out means system won't do AC3
decode just output AC3 RAW data to SPDIF and
HDMI. Auto means system will detect which the
connected HDMI TV can decode and then output
that data. If HDMI TV can decode AC3, system
just output RAW data, if HDMI TV can decode
LPCM only; system will just decode AC3 or LPCM
to be LPCM and then output.
5 Press [Exit] key to draw back from "TV System"
menu.
5.3

Local Time Setting

1 GMT Usage: This item is use for open the usage
of GMT. You can press [Volume Up / Volume
Down] keys to switch "On/Off".
2 The "GMT Offset" item is valid only when the
setting of "GMT Usage" is "On". You can press
[Volume Up / Volume Down] keys to switch "GMT
Offset" value and the range is "-12:00 ~ +12:00",
increase each half hour progressively.
3 Summer Time: This item only valid when the
setting of "GMT Usage" is "On". When "Summer
Time" is "On", it will add one hour to the time.
4 "Date" and "Time" items are valid only when the
setting of "GMT Usage" is "Off". You can press
[Volume Up / Volume Down] keys to moving
highlight and use number keys to input directly.
i. If the current channel provides the
correct time information, you will see the
current time while you enter "Time"
menu. If the channel doesn't provide
time information, you have to input the
date and time information manually.
5 Press [Exit] key to draw back from "Time" menu.
15