Unit Conversion; Error Codes - Active Era BS-02 Manual De Instrucciones

TO INSERT OR REPLACE BATTERY
1. Carefully remove the battery cover on the underside of the scales
2. Insert 1 x CR2032 3V battery into the compartment as per the directions
indicated
3. After inserting the batteries, replace the battery cover

UNIT CONVERSION

These scales measure weight in Kilograms (kg), Pounds (lb) and Stone (st). Press
the button on the underside of the scales to switch between them.

ERROR CODES

- 'Lo' – Batteries are low and needs replacing
- 'Err' – Scales are overloaded and have exceeded maximum weight. Step off the
scales to avoid damaging the sensors
- 'C' – A measuring error has occurred. Step off scales and back on again
SAFETY
- Never overload the scales. This may damage the sensors
- Do not leave heavy items on the scales when not in use
- Keep away from water
- To avoid slipping, keep the scales dry and never use with wet feet
- Always keep the scales horizontal
- To clean the scales, wipe with a soft damp cloth. Never use cleaning chemicals.
- The scale is not recommended for the following:
o Pregnant women
o Those fitted with a pace maker or similar implanted medical device
o Those who have symptoms of edema
o Those of dialysis treatment
o Athletic or muscular body type (body builders)
5 | English