Warning And Safety Instructions - Miele professional A 502 Instrucciones De Manejo

Carros inyectores
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 36
en - Warning and Safety instructions
To avoid the risk of accidents and damage to this mobile unit
please read these instructions carefully before using it for the first
time.
Keep these instructions in a safe place where they are accessible
to users at all times.
 Please also read the operating instructions for your washer-
disinfector and pay particular attention to the Warning and Safety
instructions.
This mobile unit is only for use in the areas of application as
defined in the Operating instructions. Components such as the
nozzles must only be replaced with Miele accessories or original
parts. Any other application, modification or change is unauthorised
and could be dangerous.
Miele cannot be held liable for damage caused by unauthorised use
or incorrect operation.
The load carrier is set up by Miele during the commissioning
process.
New load carriers must be cleaned in the washer-disinfector
without a load prior to first use.
Inspect all mobile units, modules and inserts daily as described in
the "Maintenance" section in the operating instructions for the
washer-disinfector.
Only items which have been declared by their manufacturer as
suitable for machine reprocessing may be processed. The manufac-
turer's specific reprocessing instructions must be observed.
Disposable instruments must not be put into the machine for
processing.
Coding must be correctly set when using automatic mobile unit re-
cognition.
Do not place any items for reprocessing which will cover other
items or trays which are overloaded on the lower level, as the
cleaning solution will not be able to reach the items sufficiently.
Before connecting hollow instruments, please make sure that all
hollow sections are free of blockages. Otherwise the cleaning solution
will not be able to access all areas properly.
Any hollow items that have become disconnected from their
injector nozzles, adapters or holders during processing must be
re-processed.
Miele cannot be held liable for damage caused by non-compliance
with these Warning and Safety Instructions.
29

Publicidad

Tabla de contenido
loading

Tabla de contenido