Preparing your modem
1.
Unplug the power cable/DSL modem. If it has a battery
backup, remove the battery.
NOTE:
will need your username/password from your In-
ternet Service Provider (ISP) to properly configure
the router.
2.
Connect your modem to the router with the bundled
network cable.
3.
Power on your cable/DSL modem.
4.
Check your cable/DSL modem LED lights to ensure the
connection is active.
4
WEU12549_RT-AC86U_QSG_172x144mm.indb 4
If you are using DSL for Internet, you
Unplug
2017/5/16 16:12:28