Bourgeat SATELLITE 4G Instrucciones De Uso Y Mantenimiento página 34

- The following pictograms appear :
Press the screen once
The temperature in the trolley is not compliant with cold link standards. Hot products are detected in the chamber.
Check that the products were properly refrigerated beforehand. Confirm the error message.
- The following pictograms appear :
Press the screen once
The temperature in the trolley is not compliant with cold link standards. The interface displays the detection of a problem with the elec-
trical power, adjustment or ventilation. Confirm the error message.
Check the power source for the trolley, ensure that the fan is not blocked and that the sensor behind the air circuit is clear and clean. If
the «spanner + hand» pictogram appears, the safety thermostat has been triggered, the trolley is in fault. Contact your installer.
- If the following pictograms appear :
Press the screen
once
An adjustment problem is detected. Check that the temperature sensor behind the air circuit is clean and clear. Confirm the error mes-
sage. If the «spanner + hand» pictogram appears, the trolley is in fault. Contact your installer.
- 34 -
°
>10
OK OK
OK
°
>10
OK OK
OK OK
OK OK
OK OK