Innovaciones M.S. Bed safety rail Manual De Instrucciones página 16

UK
"IMPORTANT": PLEASE READ THE INSTRUC-
TIONS FOR USE CAREFULLY AND SAVE THEM FOR
FUTURE USE.
We sincerely appreciate your trust in our Innovaciones MS products.
The bed safety railing insures worry-free nights, keeping your baby safe and
avoiding any possible falls.
INSTRUCTIONS TO ASSEMBLE THE BED SAFETY RAILlNG
Line up the curved round bars (D) with the flat bars (C), (Fig. 1). Open the
sides and unfold the bars in such a way that they form a 90° angle (Fig. 2).
Pass the curved round bars (D) throught the upper part of the lining, then pass
the rounded bars (B) throught the lower part of the lining (Fig. 3).
Fit the bars in such a way that the structure is completely compact and rigid.
Make sure that each bar has its safety button-clip correctly blocked.
INSTRUCTIONS TO INSTALL THE BED SAFETY RAILlNG
Once the railing is assembled, place the base of the railing (A) under the
mattress, in such a way that it remains immobilized.
Make sure the structure is correctly assembled and blocked to avoid your
child from suffering any possible injury.
TO LOWER AND LlFT THE BED SAFETY RAILlNG
Simply lift both devices found on each side of the railing and let it drop while
holding on to it.
To raise the safety railing, simply lift it until you hear the devices click (fig.4).
INSTRUCTIONS FOR DISMANTLlNG THE BED SAFETY RAILlNG
Take the bars apart by pressing down on the button-clips to release them.
Dismount the cover by removing the bars and folding the two wings. Place all
the parts in your bag for comfortable storage.
INSTRUCTlONS FOR CLEANING THE BED SAFETY RAILlNG
Dismount the cover by following the steps in the previous section.
The bedding is completely washable (for more information please read the
washing instructions on the label).
Use a damp cloth to clean the metallic part, and then dry it to avoid any
rusting.