power adaptor to
the socket. The "drip
loop" is the part of the
cord below the level
of the receptacle, or
the connector if an extension cord
is in use. This prevents water from
traveling along the cord and coming
into contact with the socket or power
supply. If the plug or socket gets wet,
DO NOT unplug the cord. Discon-
nect the fuse or circuit breaker that
supplies power to the appliance then
unplug and examine for the presence
6
ofwater in the socket.
• To avoid injury, do not contact hot
parts, allow to cool down before
handling.
• CAUTION – Always unplug or
disconnect the appliance from the
outlet before putting on or taking off
parts and while the equipment is be-
ing installed, maintained or handled.
Never yank the cord to pull the power
adaptor from the outlet. Grasp the
power adaptor body and pull to dis-
connect. Always unplug an appliance
from an outlet when not in use. Never