Video Features; Display Devices; Sli Multi Gpu Configuration - Clevo P270WM Manual Del Usuario

Video Features

You can switch display devices, and configure display op-
tions, from the Display control panel in Windows and/or
the NVIDIA Control Panel as long as the video driver is
installed.
To access Display control panel in Windows:
1. Click Start, and click Control Panel (or point to Settings and
click Control Panel).
2. Click Display (icon) - in the Appearances and
Personalization category.
3. Click Adjust Screen Resolution/Adjust resolution.
OR
4. Alternatively you can right-click the desktop and select Screen
resolution.
5. Use the dropbox to select the screen resolution.
6. Click Advanced settings.
To access the NVIDIA Control Panel:
1. Click Start, and click Control Panel (or point to Settings and
click Control Panel).
2. Click NVIDIA Control Panel (icon) - in the Appearances and
Personalization category.
OR
3. Right-click the desktop and select NVIDIA Control Panel from
the menu.

Display Devices

Besides the built-in LCD, you can also use an external
VGA monitor (CRT)/external Flat Panel Display or TV
(connected to the DVI-Out port/HDMI-Out port) as your
display device.

SLI Multi GPU Configuration

This computer features an NVIDIA Scalable Link Inter-
face (SLI) that improves graphic quality and performance
by combining dual NVIDIA GPUs (two video cards are
required) in a single system. To enable/disable SLI Con-
figuration:
1. Go to the NVIDIA Control Panel.
2. Click "+" next to 3D Settings if its sub-items are not shown and
then click Set SLI Configuration.
Figure 10 - Set SLI Configuration
3. Click "Enable SLI technology (recommended)".
4. Click to "Select the display to view the SLI rendered content
on." (only a single display may be used).
5. Click Apply and Yes to restart the computer.
17