Pc Camera; Pc Camera Driver Installation; Pc Camera Audio Setup - Clevo P270WM Manual Del Usuario

PC Camera

Before installing the PC Camera driver, make sure the PC
Camera module is powered on. Use the Fn + F10 key
combination or touch sensor instant key
er to the PC Camera module. When the PC Camera mod-
ule is powered on, the LED will be highighted and the
on-screen visual indicator

PC Camera Driver Installation

1. Click Option Drivers (button).
2. Click 1.Install WebCam Driver > Yes.
3. Click Next > Install > Finish to restart the computer.
OR
Choose the language you prefer and click Next > Next
> Finish.
OR
Click Next > Finish to restart the computer.
4. Run the camera application from the desktop shortcut.
26
to toggle pow-
will briefly be displayed.

PC Camera Audio Setup

If you wish to capture video & audio with your camera, it
is necessary to setup the audio recording options in Win-
dows.
1. Click Start, and click Control Panel (or point to Settings and
click Control Panel).
2. Click Sound (Hardware and Sound).
3. Click Recording (tab).
4. Right-click Microphone (Realtek High Definition Audio) and
make sure the item is not disabled.
5. Double-click Microphone (or select Properties from the right-
click menu).
6. Click Levels (tab), and adjust the Microphone and
Microphone Boost sliders to the level required.
7. Click OK and close the control panels.
8. Run the camera application from the desktop shortcut.
9. Go to the Devices menu heading and select Microphone
(Realtek....) (it should have a tick alongside it).
10. Go to the Capture menu heading and select Capture Audio (it
should have a tick alongside it).
11. To obtain the best sound recording quality enable Noise
Supression in the Realtek HD Audio Manager control panel
(see Setup for Audio Recording on page 22).