Troubleshooting - Clevo P270WM Manual Del Usuario

Troubleshooting

Problem
The Wireless LAN/Bluetooth
modules cannot be detected.
The Bluetooth module is off
after resuming from Sleep.
The captured video files from
the PC Camera are taking up
too much disk space.
No sound can be heard
through an HDMI connected
display device.
The computer is off (or in
Sleep Mode) but powered by
the AC/DC adapter plugged in
to a working outlet or powered
by the battery with a capacity
level above 20%. I have
plugged a device into the
powered USB port in order to
charge it, but the device is not
charging.
34
The modules are off. Check the appropriate touch sensor indicator to see if the modules are on or
off (see Touch Sensor Instant Keys on page
the appropriate touch sensor instant key/function key combination in order to enable the modules.
The Bluetooth module's default state will be off after resuming from the Sleep power-saving state.
Use the key combination (Fn + F12) or touch sensor instant key
module after the computer resumes from Sleep.
Note that capturing high resolution video files requires a substantial amount of disk space for each
file. See Reducing Video File Size on page
You have not configured the HDMI audio output. See
The port is not powered on. Toggle power to the port using the Fn + power button combination.
This function may not work with certain external USB compliant devices (check your device's
documentation). If this is the case, power the computer on and connect the external USB
device in order to charge it.
Possible Cause - Solution
8). If the LED indicator is not illuminated, then press
27.
Audio Setup for HDMI on page
to power on the Bluetooth
21.