J SEEK +/– buttons
CD/USB:
To skip tracks (press); skip tracks
continuously (press, then press again within
about 1 second and hold); reverse/fast-
forward a track (press and hold).
Radio:
To tune in stations automatically (press); find
a station manually (press and hold).
Bluetooth audio device*:
To skip tracks (press).
K BT (BLUETOOTH) button page 17
For Bluetooth signal on/off, pairing.
L MODE button page 12, 15, 16
Press to: Select the radio band (FM/AM)/
select the play mode of iPod.
Press and hold to: Enter/cancel the passenger
control.
M
(BROWSE) button page 11
To enter the Quick-BrowZer mode.
N BTM button page 12
To start the BTM function (press and hold).
O Frequency select switch (located on the
bottom of the unit)
See "Frequency select switch" in the
supplied installation/connections manual.
P Number buttons
CD/USB:
(1)/(2): ALBUM –/+ (during MP3/WMA/
AAC playback)
To skip albums (press); skip albums
continuously (press and hold).
(3): REP page 13, 14, 16
(4): SHUF page 13, 14, 16
(6): PAUSE
To pause playback. To cancel, press
again.
Radio:
To receive stored stations (press); store
stations (press and hold).
Bluetooth audio device:
(6): PAUSE
To pause playback. To cancel, press
again.
Bluetooth phone:
(5): MIC page 18
Q DSPL (display)/SCRL (scroll) button
page 13, 14, 16
To change display items (press); scroll the
display item (press and hold).
R AUX input jack page 22
To connect a portable audio device.
S Microphone page 18
Note
Do not cover the microphone, the handsfree
function may not work properly.
T RESET button page 6
U Disc slot
To insert the disc.
V Z (eject) button
To eject the disc.
* When a Bluetooth audio device (supports AVRCP of
Bluetooth technology) is connected. Depending on
the device, certain operations may not be available.
Notes
• When ejecting/inserting a disc, keep any USB
devices disconnected to avoid damage to the disc.
• If the unit is turned off and the display disappears, it
cannot be operated with the card remote
commander unless (SOURCE) on the unit is
pressed, or a disc is inserted to activate the unit first.
9